|
Pump and mixer
The MC pump and Ahlmix mixer from Ahlstrom are both designed for direct drive. This design improves reliability and simplifies installation. In addition, the design saves space, energy, and maintenance. Both the Ahlmix mixer and the MC pump make use of a back pullout design that allows use of a pre-assembled power end and makes maintenance for the products quick and easy. Ahlstrom Pumps
READER SERVICE NO. 501
|
|
|
Peristaltic pumps
Alfa Laval Pumps Inc. offers the Elro series peristaltic pump technology with a patented hose-in-hose design feature. This unique feature provides many advantages when dealing with difficult applications. It improves suction lift capabilities, maintains consistent performance, and allows for planned maintenance. Alfa Laval Pumps Inc.
READER SERVICE NO. 502
|
|
|
Centrifugal pumps
Ansimag Inc. has developed corrosion resistant, self-priming centrifugal pumps with seal-less, magnetic drive configurations. The KP series are designed to meet a demand for easy maintenance and wide range of chemical handling applications such as bulk chemical transfer and mixed acid wastewater treatment. Ansimag Inc.
READER SERVICE NO. 503
|
|
|
Electric condensate pump
Armstrong Fluid Handling has introduced yet another addition to its condensate recovery products group. Armstrong now offers cast iron and steel receiver electric condensate pumps as packaged units, pre-assembled, wired, and factory tested.Armstrong International Inc.
READER SERVICE NO. 504
|
|
|
No leak pump
LM Series models are designed to prevent any leakage from the pump by incorporating a magnetic drive without stuffing boxes or mechanical seals, which are subject to leak. The pump is hermetically sealed <br>and prevents any leakage to environment or any infiltration into liquid from outside. The casing is made of stainless steel with ANSI # 150 flanges. Apex Equipment Inc.
READER SERVICE NO. 505
|
|
|
Submersible pump
The R100-115 electrical submersible pump offers great performance and features normally only offered with larger, more expensive pumps of this type. The motor is protected by a heavy-duty mechanical seal made of silicon carbide and a lip seal made of oil-resistant Buna. The rotor shaft, motor housing, and all hardware is made of 304 stainless steel, and all other "wet parts' are made of reinforced plastic. BJM Corp.
READER SERVICE NO. 506
|
|
|
Process pumps
For demanding mill pumping applications involving bleaching, showers, liquors, wet-end operations and cooling towers, Chesterton System One Frame SD Pump is the heavy-duty alternative to standard small-frame pumps that can easily become overstressed when operated off their best efficiency point. A.W. Chesterton
READER SERVICE NO. 507
|
|
|
Open loop pumps
A totally revised and updated 32-page technical brochure describes Denison Hydraulics' Worldcup series P6W, P7W, and P8W line of axial piston, variable displacement open loop pumps for a variety of applications. Worldcup series pumps have displacements of 6, 7.25, and 8 in.3 /rev., respectively. Units P6W and P7W have maximum continuous pressure ratings of 5,000 psi (345 bar), while the P8W's is 4,500 psi (310 bar) P8W. Denison Hydraulics
READER SERVICE NO. 508
|
|
|
Pumping problems brochure
Discflo Corp. has published a new 28-page brochure describing the operation of the disc pump-a unique design of pump that combines the advantages of both centrifugal and positive displacement pumps in one. The brochure describes the pump's capabilities in handling highly viscous and abrasive materials, fluids with high volumes of entrained air/gas, and delicate and shear-sensitive chemicals. Discflo Corp.
READER SERVICE NO. 509
|
|
|
Gas removal pumps
Ahlstrom AST/ART self priming gas removal pumps are designed for self priming and gas containing liquids. The AST/ART pumps allow for stable and trouble-free pumping by decreasing up to 50% of the gas content in the pumped liquid. Open and special open impellers are available for a variety of applications, including pumping clean liquids and liquids containing solid particles, abrasive liquids, or stock up to 8% consistency. Ahlstrom Pumps
READER SERVICE NO. 510
|
|
|
Portable pump
The Gorman-Rupp Co. announces a new 4 in. self priming engine-driven trash pump that was developed for handling solids-laden liquids. The new Gorman-Rupp model 14D1-Gx390 is constructed of 356-T6 aluminum for peak portability. It has a silicon carbide faced mechanical seal and ductile iron open-type, two vane impeller. The Gorman-Rupp Co.
READER SERVICE NO. 511
|
|
|
Pump selection guide
Goulds Pumps Inc. announces a new full-color brochure designed to allow users to select the best pump for any particular service. Goulds' Pump Selection Guide includes a user-friendly selection chart that lists <br>54 different pump models/types. Complete information on each pump is detailed including hydraulic ratings, features, materials of construction, and number of sizes. Goulds Pumps Inc.
READER SERVICE NO. 512
|
|
|
Centrifugal pump
Godwin Pumps of America Inc. has introduced the new Godwin HL5M Dri-Prime pump. The HL6M 6 in. x 6 in. centrifugal pump is a powerful high pressure pump with flow capabilities to 1,450 gpm and discharge heads to 485 ft. Godwin Pumps of America Inc.
READER SERVICE NO. 513
|
|
|
Metering pumps
Fluid Metering Inc. has published a full-color catalog that features its line of dispensers and metering pumps. FMI pioneered the patented, valveless, rotating and reciprocating piston metering pump concept and has been delivering precise fluid control for more than 30 years. The catalog features product descriptions on the company's equipment and accessories plus a guide to help users select the right pump for an application. Fluid Metering Inc.
READER SERVICE NO. 514
|
|
|
Double diaphragm pump
Graco's New Husky 203 is a 1/4-in., air-operated diaphragm pump. The compact pump is capable of delivering up to 3 gpm and provides a maximum fluid working pressure of 100 psi. It is designed to transfer a variety of fluids. The new pump has a flexible base for mounting in any orientation and is available with ports for external solenoid valve operation.Graco Inc.
READER SERVICE NO. 515
|
|
|
Split case pump
A new four-page, full-color brochure from Hazleton Pumps describes the Model DS Double Suction, Split Case Pump for industrial services. The Hazleton double suction pump, with its rugged metallurgy, will handle clear liquids, as well as liquids contaminated with abrasive solids. Originally designed for mine dewatering applications, the DS pump has been proven reliable through decades of service. Hazleton Pumps Inc.
READER SERVICE NO. 516
|
|
|
Metering pump
Penn Process Technologies has added a new metering pump to its Hydroflo line of diaphragm metering pumps. A new Cheminjector-D Series 1077 high-flow metering pump is now available in flow rates to 102 gph at discharge pressures to 200 psig. The Series 1077 pump is available in 316 stainless steel, CA-20, and PVC liquid end materials of construction. Penn Process Technologies Inc.
READER SERVICE NO. 517
|
|
|
Dewatering pump
The new, cost-efficient, compact P601 portable submersible dewatering pump from Pumpex Inc., controls tough drainage and fluid handling problems with full-sized, heavy-duty pumping action, handling heads up to 60 ft and flows up to 180 gpm. Engineered as a low-cost option, the P601 provides reliable efficiency and easy maintenance. Pumpex Inc.
READER SERVICE NO. 518
|
|
|
Peristaltic pump
seepex Inc. has introduced <br>a totally new pump design. The new MAP, Multi-Hose Axial Flow Peristaltic Pump, combines the best features of progressive cavity and peristaltic pump technologies. The patented design offers seal-less performance with fewer pulsations and longer hose life than conventional radial peristaltic designs. seepex Inc.
READER SERVICE NO. 519
|
|
|
Vacuum pumps
Stokes Vacuum Inc. has announced a new, more compact line of Chem-Dry vacuum pumps that do not require inter-stage heat exchangers, external piping, or drain tanks. Named the Eagle Series, the line continues all the best features that have resulted in widespread adoption of Stokes' previous Chem-Dry pumps. Stokes Vacuum Inc.
READER SERVICE NO. 520
|
|
|
Peristaltic hose pumps
Watson-Marlow/Bredel introduces a new 15-page color brochure describing the complete line of Bredel heavy-duty peristaltic hose pumps, including nine models with flow rates ranging from 0.1 to 250 gpm. Ideal for metering and transfer applications involving corrosive chemicals, abrasive slurries, viscous materials, and shear sensitive fluids.Watson-Marlow/Bredel
READER SERVICE NO. 521
|
|
|
Double diaphragm pump
Versa-Matic Pump Co. has expanded its pump line to include the new model E4, 1-1/4-in. Elima-Matic pump available in aluminum, cast iron, Hastelloy C, and stainless steel. The new E4 pump model features the Elima-Matic anti-stalling, non-icing, lube-free air valve system and is interchangeable with the V4 and Wilden M4 metallic and plastic pumps.Versa-Matic Pump Co.
READER SERVICE NO. 522
|
|
|
Bolted pumps
Wilden Pump & Engineering Co. introduces its M4 and M8 Bolted Pump Series for specialized service in critical chemical process applications. These 1 1/2-in. and 2 in. air-operated, double diaphragm pumps are capable of delivering up to 70 and 158 gpm, respectively, and developing up to 125 psig head pressures. The absence of close-fitting parts allow solids to pass through the pump without harm.Wilden Pump & Engineering Co.
READER SERVICE NO. 523
|
|
|
Paper stock pump
Ingersoll-Dresser Pump Co. is making available a new brochure on its FRBH heavy-duty paper stock pump. Designed for easy maintenance, reliability, and long life, Ingersoll-Dresser Pumps' FRBH paper stock pumps are among the world's most efficient pumps. Ingersoll-Dresser Pump Co.
READER SERVICE NO. 524
|
|
|
Vacuum pump
Vooner Vacuum Pumps Inc. introduces the Vooner Basic pump. This new pump contains many of the popular features of Vooner's VaneGard pump but is priced along the lines of a rebuilt pump. Like the VaneGard, the Basic pump has a cast stainless steel rotor to protect against Vaneslip and gives a mill guaranteed 100% capacity from the start. Vooner Vacuum Pumps Inc.
READER SERVICE NO. 525
|
|
|
Magnetic drive pump
The new Viking Mag Drive pump utilizes an improved magnetic coupling design. "Through-shaft" cooling of the coupling allows operation at higher speeds and on higher liquid viscosities. The Viking Mag drive pump eliminates mechanical shaft seals and potential liquid leaks.Viking Pump Inc.
READER SERVICE NO. 526
|
|
|
Shower pumps
Sunflo high-pressure centrifugal pumps offer robust performance in a simple, compact single-stage unit. Pumps incorporate an easy-to-remove rotating shaft assembly that allows for complete in-place overhaul in 30 min. Close-coupled configuration eliminates bedplates, couplings, and belts, making Sunflo ideal for OEM packages without a frame unit. Sunstrand Fluid Handling Corp.
READER SERVICE NO. 527
|
|
|
Submersible pump
The Flygt H5500 abrasion-resistant submersible pump incorporates advanced hydraulics that result in enhanced wear resistance; a replaceable volute liner and impeller in a choice of high-chrome cast iron or polyurethane; an optional agitator for solids suspension; and the proven Flygt Submersible Drive. ITT Flygt Corp.
READER SERVICE NO. 528
|
|
|
Vacuum pumps
Essential for all paper machines is a well-designed and reliable water removal system. Nash 904 Series Vacuum Pumps are the heart of the most efficient machine vacuum systems and are available in sizes from 3,000 <br>to 20,000 cfm. The pumps are manufactured in all cast iron, stainless fitted, or all 316 stainless steel to suit all pulp and paper mill applications. Every pump is factory tested and includes a two-year warranty. Nash Pulp & Paper
READER SERVICE NO. 529
|
|
|
Centrifugal slurry pump
Warman's Model GP pump bridges the gap between soft metal (cast iron, stainless steel, etc.) pumps designed for clear liquids and the hard metal (high chrome) or heavy duty elastomer-lined pumps used for very abrasive slurries. The GP line is a model of pumps designed for medium-to-light abrasive slurries and corrosive slurries. Warman International Inc.
READER SERVICE NO. 530
|
|
