A new eight-pg. color brochure is now available from Rockwell Automation. It features the full line of Dodge and Reliance Electric brand products, designed specifically to meet pulp and paper industry requirements. It also includes a diagram of a pulp and paper facility that identifies various applications, from debarking to converting, where these products are used. Rockwell Automation

To meet increasingly stringent NOx emission limits, selective catalytic reduction (SCR) systems are becoming a key technology. From computational modeling, project planning, and design to construction and startup, Babcock & Wilcox (B&W) offers complete turnkey SCR solutions for NOx reduction. B&W develops a project-specific SCR solution using either plate or honeycomb catalyst and supplies the complete balance of plant scope. Babcock & Wilcox

Combining the right pattern with the right alloy, Doyle designs a reliable plate that resists wear, abrasion, and corrosion. The pattern, fit, and alloys are matched to deliver the specific quality of pulp required. In addition, the energy application, tonnage demand, and processing rate for a specific system are built into the plate specification to provide production efficiency. Doyle Engineered Products

Berthold Systems’ photon density gauges utilize scintillation technology to measure density, percent solids, and concentration in green liquor recovery applications. The photon gauge is designed for areas where contamination or coating of intrusive sensors might cause significant measurement errors. The remote wall-mounted electronics unit is housed in NEMA 4x enclosure and accessed by a membrane keypad. Berthold Systems Inc.

Huytexx forming fabric from Weavexx features a patent pending stitch design. It eliminates problems associated with conventional triple layer fabrics where the stitch yarn on the top surface has the potential of marking the sheet, causing wear and premature fabric failure. Huytexx top surface combines with CMD yarns to create a “plain weave” surface. The high fiber support index maximizes drainage and retention. Weavexx

Morbark’s new high-speed chip screen features a 5 ft-by-10 ft frame, along with a 10 hp, 1,800 rpm electric motor and the capability of sorting three chip sizes. Screening plates can be made to different hole specifications and are easily removable. Changing a screen requires only the loosening of the holding brackets. The new Morbark chip screen is capable of screening 4,600 ft³/hour. Morbark Inc.

A new family of wet end starches from National Starch & Chemical can increase drainage by 25%. In addition, it allows for paper machine speed increases of approximately 5%, improves sheet formation, or allows for increasing mechanical refining. Designated OptiPLUS starches, these products provide superior fiber interaction, resulting in higher paper strength. National Starch & Chemical Co.

A new line of creping blades used in The Zebra screen facilitates low attrition reject removal, low energy input, fiber-free rejects, and the separation of Styrofoam. By incorporating an ergonomic and economical design, the Zebra screen reduces costs by almost 40%. It also eliminates the need for a costly, remote headbox and addresses lower fiber loss. Zebra Machine Works Inc.

A new 30-pg. catalog featuring Strahman’s full line of piston-type sampling valves is now available. The catalog features detailed information and illustrations for more than 20 hand and air cylinder operated sampling valve models, as well as information on valve accessories and enhancement equipment. These piston-type valves are designed to prevent settlement and clogging. Strahman Valves Inc.

The new FillCheck overfill protection system from Innovative Sensor Solutions can be used as an independent alarm system or for redundant protection in conjunction with existing tank gauging systems. It provides a reliable, low cost solution for meeting state and EPA requirements for secondary overfill protection systems. The unit is completely wireless, allowing it to be used with installations in remote areas. Innovative Sensor Solutions Ltd.

Ramoy pumps from Moyno can handle water-like liquids, lubricating oils, and abrasive and corrosive fluids. They are offered in more than 40 different models and feature compact, lightweight designs. They also feature quiet operation, pressures to 150 psi, and flow rates from 0.02 gpm to 50 gpm. The pumps are self-priming and come in motorized, non-motorized, and grinder versions. Moyno Inc.

Prochem MD and PB belt driven mixers from Chemineer are side-entry units featuring the Maxflo Mark II hydrofoil impeller for maximum efficiency and energy conservation. The MD mixers incorporate a modular design that includes easily accessible shaft bearing cartridges. This construction improves performance and simplifies maintenance. Chemineer Inc.

A new color brochure from Falk describes its line of A-Plus gear drives in metric measurements. These gear drives can meet requirements up to 15,000 kW (19,000 hp) and catalog torque ratings to 630,000 Nm with speed ratios from 1.8:1 to 437.9:1. They are available in horizontal or vertical arrangements, solid or hollow output shafts, and parallel and right angle designs.Falk Corp.

Knife gate valves from DeZurik are designed to withstand high pressures and abrasive slurries found in the paper industry. They are ideal for isolation in high-pressure, high-density slurry lines. The valves are pressure rated to ANSI Class 150 and 300, and they are available in sizes from 6 in. to 36 in. They also feature cast carbon steel construction, and an integral bonnet is standard on ANSI Class 300 valves. DeZurik

Re-Coil-Away doors from M& I Door Systems are manufactured to withstand the harshest, most caustic working environments. The door’s fabric is 1/4-in.-thick styrene butadiene rubber with polyester reinforcing weave core to ensure durability. Offered by Albany International, this door maintains resiliency and flexibility in temperatures from -40ºF to 180ºF. Albany International

The Accu4 system uses EPA-approved GLI Method 2, ratiometric 4-beam measurement technique to provide accurate low-level turbidity measurement. Measurement is made using two near infrared LEDs. The Accu4 system is ideal for use by water treatment facilities trying to meet the strenuous requirements of the Enhanced Surface Water Treatment Rule, individual filter, and combined effluent regulations.GLI International Inc.